2H TUBEDEK® FOR AQUACULTURE

EFFICIENT SLUDGE REMOVAL

The separation of sludge in recirculation aquaculture systems can be enhanced and made more economical with the TUBEdek® lamella separators. A TUBEdek® installation results in a plant with a smaller foot print compared to more traditional methods of settlement.

 

 

TUBEdek FS41.50-2

TUBEdek FS41.50-2

Sludge, sand and silts in surface water, chemical precipitation and flocculation form solids which have to be removed. The most economic process to remove this pollution is parallel plate sedimentation.

TUBEdek® lamella clarifiers base on this physical principle. They consist of single profiles, which are assembled to a module forming several adjacent tubes and multiple sedimentation planes. This design increases the sedimentation area by a factor of 6 to 15 per square meter footprint. Using TUBEdek® tube settlers therefore decreases costs by being able to build smaller tanks.

Flexibility for all different applications

Our different tube settler types enable optimized sewage treatment processes. By choosing different tube lengths and heights and by varying the inclination angle, TUBEdek® settlers can be adjusted to all kinds of process requirements and tank geometry.

Engineering support

Please use our long experience and application know-how and ask for support in designing your clarifier or sedimentation tank.

 

 

FS 41.84FS 41.62FS 41.50
FS 42.50
Potable and process water---Highly loaded surface waterSurface water
Groundwater
Filter backwash water
Waste waterPrimary sedi-mentation
Activated sludge with low sludge volume
Stormwater
Humus tanks behind fixed film processes
Aquaculture
Humus tanks behind fixed film processes
Flocculated water
Stormwater
FS 41.84FS41.62FS 41.50
FS 42.50
MaterialPVC
PPTV
PPTVPVC
PPTV
PPTV
Sedimentation area / Slope 60° (m²/m³)6.2581112
Sedimentation area / Slope 55°(m²/m³)791313.5
Vertical module height (H/mm)700-2000On request500-2000500-1000
Standard module height (H/mm)1000/ 1500100010001000
Lamella pitch (mm)83 (+/-1)64 (+/-1)45 (+/-1)43 (+/-1)
Hydraulic radius (cm)2.62.51.71.6
Contin. operation temp.
Max operation temp. PVC (°C)
55

60 (short term)
-55

60 (short term)
-
Contin. operation temp.
Max operation temp. PPTV (°C)
70

80 (short term)
70

80 (short term)
70

80 (short term)
70

80 (short term)