2H STRUCTURED PACKINGS FOR MASS TRANSFER APPLICATIONS

ENERGY SAVING THROUGH REDUCED PRESSURE DROP

Structured packings MASSdek® are high-capacity fills for chemical and physical absorption, desorption and for bio scrubbers. In view of their excellent compression strengths, they are also well suited for bio trickling filters. Due to the special configuration of the fill, a uniform distribution of liquid is maintained under both high and low hydraulic loads.

  • MASSdek® 80 Grid

    MASSdek® 80 Grid – For high dirt load

  • MASSdek® 125 HTC

    MASSdek® 125 HTC - For coarse-grained dirt matter

  • MASSdek 150 HTC

    MASSdek 150 HTC - For minor dirt load and medium separation requirements

  • MASSdek® 250 HTE

    MASSdek® 250 HTE - For clean media and minor dirt load with higher separation requirements

  • Vertical Flow Fill KFP 318

    Vertical Flow Fill KFP 318

  • Vertical Flow Fill KFP 323

    Vertical Flow Fill KFP 323

STRUCTURE BRINGS EFFICIENCY

MASSdek structured packings are manufactured by welding profile-shaped plastic foils onto each other. Two aspects are important:

1.  Even liquid distribution from the structure of the whole packing

The profile-shaped foils as well as the structure reached by the inclination of the foils towards each other (channel inclination) achieve an even liquid distribution throughout the packing for low up to very high liquid loads.

2.  High rate of mass transfer by profile-shaped foils

The wave-like profiles (inner structure) of the single foils assure a continuous thorough mixing of gas and liquid. This constant renewal of the gas/liquid boundary results in high mass transfer rates.

This design proves to be more efficient than for example random packings. Tests have shown that MASSdek structured packings reach a significantly higher throughput and a lower pressure drop at the same level of mass transfer performance.

MASSdek®
250 HTE
MASSdek®
150 HTC
MASSdek®
125 HTC
MaterialPP / PVC/PVDF*
Specific surface (m²/m³)240150125
Corrugation height (mm)121927
Max. Length (mm)2400
Max. Width (mm)600
Height (mm)300 / 600
Max. operation temperature (°C)140**
Void ratio (%)< 97
NotesFor higher temperatures, special compounds or individual chemical exposure please contact us.

*Further plastics available on request

**depending on material
MASSdek® 80 GRID
MaterialPP*
Specific surface (m²/m³)80
Corrugation height (mm)20
Max. Length (mm)2450
Max. Width (mm)604
Height (mm)450
Continuous application temperature (°C)70
Max. operation temperature (°C)80
Void ratio (%)< 97
NotesFor higher temperatures, special compounds or individual chemical exposure please contact us.

*Further plastics available on request
KVP 323KVP 318
MaterialPP / PVC*
Specific surface (m²/m³)125150
Corrugation height (mm)2318
Max. Length (mm)2400
Max. Width (mm)600
Height (mm)300 / 600
Continuous application temperature (°C)70/55
Max. operation temperature (°C)80/60**
Void ratio (%)< 97
Notes*Further plastics available on request

**depending on material