2H PLASdek® Counter-Flow Cooling Tower Fills

Different types for all requirements – available in PVC and PP

From small cooling towers to large cell and natural draught cooling towers: Our PLASdek® packings fulfill all requirements. Different types of film fills with large specific surface are highly suited for clean and medium water qualities, whereas for special operation conditions and for strongly polluted water grid structures are the best choice. Ask our experts. They have long time experience and will be grateful to help you choose the right fill for your application. 

  • Cooling Fill KFP 319

    Cooling Fill KFP 319 – Highly efficient with large specific surface, for clean cooling water

  • Low fouling fills KFP 327

    Low fouling fills KFP 327, for slightly and medium polluted water

  • Low fouling fills KVP 323

    Low fouling fills KVP 323, for slightly and medium polluted water

  • Low fouling fills KGP 320

    Low fouling fills KGP 320, for slightly and medium polluted water

  • Trickle Grid Fill NET 150

    Trickle Grid Fill NET 150 - Easy to clean, for special operation conditions, for strongly polluted water

  • Splash Cooling Fill FC70.34

    Splash Cooling Fill FC70.34 - Easy to clean, for special operation conditions, for strongly polluted water

Overview: PLASdek® Cooling Fills made of Polypropylene

Highly efficient with large specific surface, suited for clean cooling water

KPP 312KZP 312KFP 319 
Contact surface [m²/m³]232240150
Corrugation height [mm]121219
ChannelsCross-flutedCross-flutedCross-fluted

 

Low fouling fills, for slightly and medium polluted water

KVP 319KGP 320KBP 320KVP 323KFP 327
Contact surface [m²/m³]144142142125125
Corrugation height [mm]1920202327
ChannelsVertical flowVertical flow / off setVertical flow / off setVertical flowCross-fluted


Easy to clean, for special operation conditions, for strongly polluted water

NET25 150FC20.30 KFP 638FC70.34
Contact surface [m²/m³] up to 1301107094
Corrugation height [mm]20303834
ChannelsGrid / diagonal Cross-flutedCross-flutedGrid / horizontal


OVERVIEW: PLASDEK® COOLING FILLS MADE OF PVC

Highly efficient with large specific surface, suited for clean cooling water

KZC 312KPC 312KFC 319
Contact surface [m²/m³]240232150
Corrugation height [mm]121219
ChannelsCross-flutedCross-flutedCross-fluted


Low fouling fills, for slightly and medium polluted water

KVC 319KGC 320KBC 320KFC 327
Contact surface [m²/m³]144142142125
Corrugation height [mm]19202027
ChannelsVertical flowVertical flowVertical flow / off setCross-fluted


General Technical Data of 2H PLASdek® Fills

PPPVC
Void ratio [%]> 97
Length max [mm]2400
Width max [mm]600
Standard height [mm]300 or 600
Continuous operation temperature [°C]8055
Max. operation temperature (short term) [°C]9060

Maximum application temperature:

The operational temperature should be measured at the inlet pipe of the system and should not exceed the maximum temperature stated above.

High temperature applications:

Fill media in high temperature in PP (up to 100°C) available on request.

Flammability:

Products in flame retardant version according to American (ASTM E84, UL 94) and European standards (DIN 4102, NF P 92-501) are available on request. National regulations on fire protection should be taken into consideration before choosing a product.


DIFFERENT TYPES OF FILLS

KPP 312 KPC 312KZP 312 KZC 312KFP 319 KFC 319KFP 327 KFC 327KFP 638 KFC 638
Contact surface [m²/m³]23224015012570
Void ratio [%]> 97> 97> 97> 97> 97
Corrugation height1212192738
NoteKFP/KGP/KVP/KBP = Fills in PP
KFC/KGC/KVC/KBC = Fills in PVC

KVP 319 KVC 319KGP 320 KGC 320KBP 320 KBC 320KVP 323 KVC 323
Contact surface [m²/m³]144142142125
Void ratio [%]> 97> 97> 97> 97
Corrugation height 19202023
NoteKFP/KGP/KVP/KBP = Fills in PP
KFC/KGC/KVC/KBC = Fills in PVC

 

 

 

 

FC20.30FC70.34
Contact surface [m²/m³]11094
Void ratio [%]> 95 > 93
Corrugation height 3034
NoteOur splash cooling fills are made of PP
NET25 150
Contact surface [m²/m³]up to 130
Void ratio [%]> 97
Corrugation height20
NoteOur trickle grid fills are made of PP